描述
HIKVISION DS-3WF15KS-SI-5ACG/H 5Ghz 867Mbps 15KM Industrial Wireless Bridge 是海康威視無線傳輸設備（路由器、AP、延伸器或 USB 適配器）。香港防盜為安裝商及經銷商。覆蓋以現場測試為準。
DS-3WF15KS-SI-5ACG/H
5Ghz 867Mbps 15KM Industrial Wireless Bridge
香港防盜為安裝商及經銷商。規格以原廠 datasheet 為準。
- General
- Product Dimensions (W × H × D)134mm × 224.09 mm × 96.58 mm（without antenna）
- Package Dimensions (W × H × D)392 mm × 392 mm × 155 mm (15.43″ × 15.43″ × 6.10″)
- Net Weight1.6 kg (3.52 lb) per device
- Gross Weight4.2 kg (9.24 lb)
- Packing ListWireless Bridge × 1,PoE Power Supply × 1,AC Cord × 1,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1,Antenna x 1，Waterproof plug x 3，Mounting bracket x 1
- Packing MethodSingle unit packing
- Working Temperature-40 °C to 70 °C (-40 °F to 158 °F) Note: The actual operating temperature range of the entire device depends on the power adapter. The default adapter supports a maximum of 65°C (149°F). To achieve the full 70°C (158°F) operating range, an optional industrial-grade power adapter must be used.
- Working Humidity5% to 95% (no condensation)
- Storage Temperature-40 °C to 80 °C (-40 °F to 176 °F)
- Storage Humidity5% to 95% (no condensation)
- Installation ModePole Mounting
- Ingress ProtectionIP68
- Power Consumption4 W for typical (1-ch 2MP IPC), Max. 7 W
- ESD Protection±15 kV(Air) / ±8 kV(Contact)
- Surge Protection6 kV
- Wireless Parameter
- Max. Transmission Rate of Air Interface≤ 867 Mbps
- Wireless StandardIEEE 802.11/a/n/ac
- Working Frequency Band5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5825 MHz,(Note: Available channel may vary with local regulations.)
- Antenna Gain15 dBi
- Antenna Angle(H) Beamwidth [3 dB] 30° (V) Beamwidth [3 dB] 30°
- Transmitting Power29 dBm @11ac 80MHz MCS0 (Note: Transmitting power may vary with local regulations.)
- Receiving Sensitivity-88 ±2dBm@AC80-MCS0
- RF DesignThe band-pass filters are used to remove unwanted frequencies from the singal.
- Throughput RatePTP:300 Mbps/5 KM(AC80), 180 Mbps/10 KM(AC80), 110 Mbps/15 KM(AC80); PTMP(1 to 8): 110 Mbps/5KM(AC80)
- Hardware Parameter
- Network Interface2 × 10/100/1000 Mbps RJ45 ports
- LED IndicatorPower indicator,LAN indicator,Signal intensity indicator
- ResetHardware resetting button
- Power Supply24 V Passive PoE/9~36 V DC;Check the physical interface image below for more details.
- Software Function
- Application FunctionIFM,IPM,DFS,TPC
- Channel Width20/40/80 MHz
- Channel SelectionAuto/manual selection
- Security ModeWPA2-PSK
- Security MechanismWireless network name hidden
- Network ProtocolNTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
- Management MethodHCP,Web,iVMS-4200,HPP
- System LogSyslog,Control center information
- UpgradeWeb,iVMS-4200,HCP,HPP
- HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning
- PoE Power Supply
- PoE PortLAN1 passive PoE IN
- PoE Distance100 m
- Approval
- EMCCE-EMC(EN 55032, EN 61000-3-3, EN IEC 61000-3-2, EN 50130-4, EN 55035)
- SafetyCB (IEC 62368-1),CE-LVD (EN 62368-1)
- ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- RadioEN 301 893,EN 300 440,EN 301 489-3,EN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN IEC 62311
