傑成系統有限公司 KNS SYSTEM LTD 保安公司牌照 1507 註冊電業承辦商 029394
香港防盜 SECURITY HK

CommScope CS41O BLK C6A 423 UUTP RL 1KFT CS41O Category 6A UUTP Cable outdoor gray jacket 4 pair count 1000 ft 305 m length reel

查詢價錢

CS41O Category 6A UUTP Cable outdoor gray jacket 4 pair count 1000 ft 305 m length reel。規格以原廠資料為準。

此型號可由傑成系統有限公司上門安裝(保安牌照 1507)。身份為安裝商及經銷商。安裝見閉路電視安裝;保養見保養;其他公司系統維修見維修。

  • 持牌安裝(保安公司牌照 1507)
  • 原廠行貨,原廠保用
  • 全港免費上門勘察
貨號: 88404240810 分類: ,

描述

88404240810

CS41O Category 6A UUTP Cable outdoor gray jacket 4 pair count 1000 ft 305 m length reel

88404240810 屬CommScope線材、配線及機櫃產品。傑成系統有限公司(香港防盜)為CommScope產品安裝商及經銷商,可提供供應、安裝、調試、保養及維修。方案可參考網絡佈線工程。規格以原廠資料為準。

產品說明

CS41O BLK C6A 423 UUTP RL 1KFT — CS41O Category 6A UUTP Cable outdoor gray jacket 4 pair count 1000 ft 305 m length reel

訂購料號:88404240810;產品系列:NETCONNECT®

規格

Product classification

Regional Availability Asia | Australia/New Zealand
Portfolio NETCONNECT®
Product Type Twisted pair cable

General Specifications

Product Number CS41O
ANSI/TIA Category 6A
Cable Component Type Horizontal
Cable Type U/UTP (unshielded)
Conductor Type, singles Solid
Conductors, quantity 8
Jacket Color Black
Pairs, quantity 4
Separator Type Isolator
Transmission Standards ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class EA

Dimensions

Cable Length 304.8 m | 1000 ft
Diameter Over Insulated Conductor 1.08 mm | 0.0425 in
Diameter Over Jacket, nominal 8.204 mm | 0.323 in
Jacket Thickness 0.711 mm | 0.028 in
Conductor Gauge, singles 23 AWG

Cross Section Drawing

Click on image to enlarge. Close Modal

Electrical Specifications

Characteristic Impedance 100 ohm
dc Resistance Unbalance, maximum 5 %
dc Resistance, maximum 9.38 ohms/100 m | 2.859 ohms/100 ft
Delay Skew, maximum 45 ns
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency 6.0 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP) 65 %
Operating Frequency, maximum 500 MHz
Operating Voltage, maximum 80 V
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Material Specifications

Conductor Material Bare copper
Insulation Material Polyolefin
Jacket Material PE
Separator Material Polyolefin

Mechanical Specifications

Pulling Tension, maximum 11.34 kg | 25 lb