描述
UVC-G6-Pro-Entry
Reader G6 Pro Entry
UVC-G6-Pro-Entry 屬Ubiquiti UniFi門禁產品。傑成系統有限公司（香港防盜）為Ubiquiti UniFi產品安裝商及經銷商，可提供供應、安裝、調試、保養及維修，可配合電鎖、出門掣及管理軟件一併施工。方案可參考門禁系統。規格以原廠資料為準。
An intelligent door entry system with native UniFi Protect and UniFi Access integration with a 12MP camera, two-way audio, and a 3″ touch display.
This product was optimized for enterprise environments. Learn more.
Note. 10 free 1-year Touch Passes included. Learn more.
To enable door access features such as NFC, Face ID, and Interface Designer configuration, an Access Hub is required, and both UniFi Protect and UniFi Access applications must be installed.
規格
Overview
| Dimensions | 220 x 49.3 x 29.6 mm; (8.7 x 1.9 x 1.2") |
|---|---|
| IR Night Vision | 5 m (16 ft) |
| Resolution | Main camera: 12MP ; Package camera: 8MP |
| UniFi Application Suite | Protect; Access |
| Weatherproofing | IP55 |
| Tamper Resistance | IK07; LCM IK04 |
| Audio | Two-way audio |
| UL 294 Level | Destructive attack: Level I; Line security: Level I; Endurance: Level I; Standby power: Level I |
Mechanical
| Weight | 360 g (12.7 oz) |
|---|---|
| Enclosure Material | Aluminum |
| Mount Material | Wall mount: Stainless steel; Gangbox mount plate: SGCC steel; Gangbox mount cover: Polycarbonate; Wedge mount: Aluminum |
| Mounting | Wall mount, Gangbox mount plate, 20° wedge mount (Included); Junction box (Optional) |
Hardware
| Indoor and Outdoor Use | Yes |
|---|---|
| Networking Interface | GbE RJ45 port |
| Connectivity | BLE 4.1; NFC |
| Power Method | PoE+; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU |
| Max. Power Consumption | 18W |
| Supported Voltage Range | 42—57V DC |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR |
| Max. Frame Rate | Main camera: 12MP, 20 FPS or; 8MP, 30 FPS; Package camera: 3 FPS |
| Resolution | Main camera: 12MP, 3024 x 4096 (3:4) or; 8MP, 2160 x 3840 (9:16); Package camera: 8MP, 3264 x 2448 (4:3) |
| Resolution | Main camera: 12MP or 8MP; Package camera: 8MP |
| Field of View | Main camera:; H: 100°, V: 136.3°, D: 176.4° (12MP); H: 70.9°, V: 127.5°, D: 147.4° (8MP); Package camera: H: 66°, V: 51.7°, D: 78° |
| Sensor | Main camera: 12MP CMOS; Package camera: 8MP CMOS |
| Lens | Fixed focal length |
| Night Mode | Built-in IR LED illumination and IR cut filter |
| Size | 75 mm (3") diagonal |
| Screen Technology | Capacitive multi-touch |
| Luminance | Max. 1000 nits (Typical) |
| Screen Orientation | Portrait |
| Resolution | 480 x 854 px |
| LEDs | R/G/B/W/Amber; <a href="https://help.ui.com/hc/en-us/articles/25738084762775-Understanding-UniFi-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a> |
| Button | (1) Ring button; (1) Factory reset; (1) Tamper switch |
| Processor | Quad-core Arm® Cortex®-A53 based chip |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.; The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294.; The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UVC-G6-Pro-Entry, V01 |
| Ambient Operating Temperature | Device: -30 to 50° C (-22 to 122° F); Display: -25 to 50° C (-13 to 122° F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
