描述
HIKVISION DS-3WG210GP-SI All in One 10 Port PoE Router 係海康威視無線傳輸設備（路由器、AP、延伸器或 USB 適配器）。香港防盜為安裝商及經銷商。覆蓋以現場測為準。
DS-3WG210GP-SI
All in One 10 Port PoE Router
香港防盜為安裝商及經銷商。規格以原廠 datasheet 為準。
- General
- ShellMetal
- 0.5 kg (1.1 lb)
- Working Temperature0 °C to 40 °C (32 °F to 104 °F)
- Working Humidity5% to 95% (no condensation)
- Storage Temperature-40 °C to 70 °C (-40 °F to 158 °F)
- Storage Humidity5% to 95% (no condensation)
- Product Dimensions (W × H × D) 190 mm × 125 mm × 27 mm (7.48” × 4.92” × 1.06”)
- Packing ListAC Router × 1,Regulatory Compliance and Safety Information × 1,Quick Start Guide ×1,Screw Pack × 1,Power Supply Adaptor × 1,Power Cord × 1
- Power ConsumptionMax. 80 W
- Hardware Specifications
- WAN Port2 Gigabit WAN Ports with 1 WAN/LAN Switchable
- LAN Port8 Gigabit PoE LAN Ports with 2 LAN/WAN Switchable
- PoE PortPoE Ports: Ports 1to 8 , 802.3af/at
- Forwarding Capacity20 Gbps
- RAM256 MB
- Flash128 MB
- Power Supply54 VDC, 1.48A
- Reset ButtonHardware Resetting Button
- WLAN Parameters
- Maximum Number of Managed APs200
- Maximum Number of Clients200
- Bandwidth1 Gbps
- Networking AccessSupport fixed IP address, DHCP automatic address acquisition, PPPoE dial-up and other methods
- Number of WAN AccessUp to 4 WAN Load balancing
- Multi-WAN Load BalancingLoad balancing based on the destination address of the carrier,Load balancing based on link bandwidth,Load balancing based on user (IP address),Policy-based routing (PBR) for forwarding over specified lines,End-to-end link detection and backup functions
- CAPWAP TunnelAuto AP serial number entry,AC discovery (DHCP option43, DNS),Assign basic AP network parameter through AC (Supported: Static IP, VLAN, Connected AC address)
- Access ControlOpen System,Shared-Key,WPA,WEP-64/128, dynamic WEP,WPA2,WPA3
- Software Specifications
- Layer 2 ProtocolARP,VLAN,ARP (gratuitous ARP)
- Network FeatureIPv4,DDNS,UPnP,DHCP Server,NTP Client,Multicast,PIM,MLD Snooping,IGMP Snooping,Multicast group
- VPN IPSec VPN:,Support 100 IPSec connections,Support AH and ESP protocols (ESP supports 3DES and AES encryption algorithms),Support IKE to automatically establish SA,Support MD5 and SHA-1 authentication algorithms,Support IKE main mode and aggressive mode,Support NAT-T traversal,Support IPSec connection configuration by domain name (DDNS)
- NAT40000 Max. Access
- AP ManagementAP Discovery,AP Management,Support Multi-SSID Configuration,SSID Hiding,Channel Setting
- User ManagementUser Authentication,Support user blacklist and whitelist,Controls the number of access users:,Based on APs,Based on SSIDs,Logs out users in any of the following ways:,Using RADIUS DM messages,Using commands,Support various methods to view information:,Displays the number of online users in an ESS, AP, or radio.,Collects packet statistics on air interface based on user.
- SecurityFirewall Policy,DDoS Defending,IP/MAC/URL Filtering,ARP Defending,Support DDoS attack prevention and statistics,Support Prevent WAN port ping,Support Prevent TCP syn scan,Support Prevent TCP Stealth FIN scan,Support Prevent TCP Xmas Tree scanning,Support Prevent TCP Null scan,Support Prevents UDP scanning,Support Prevent Land attacks,Support Protects against Smurf attacks,Support Protects against WinNuke attacks,Support Protect against Ping of Death attacks,Support Protect against SYN Flood attacks,Support Protect against UDP Flood attacks,Support Protect against ICMP Flood,Support Protect against IP Spoofing,Support Prevent Fragmented Packet Attack,Support Protect against TearDrop attack,Support Protect against Fraggle attack
- System MaintenanceSupport device management via web.,Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.,Support remote management via Hik-Partner Pro. ,Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.,Support port mirroring for fault locating.
- Version UpgradeSupport upgrade by Web,Support upgrade by HPP
- Hik-Partner ProSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
- Approval
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- RadioEN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17
