描述
ROSSLARE AC-Q42HB
Anti-Vandal Backlit PIN & Proximity Standalone Controller
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
▪ Operating Voltage Range 12 to 24 VDC, from a regulated power supply
16 to 24 VAC, from a transformer
▪ Input Current (Heater Off) Standby: 85 mA, Maximum: 145 mA, at 12 VDC
(Heater On) Standby: 565 mA, Maximum: 625 mA, at 12 VDC
▪ Relay Outputs Lock Strike: 2A, N.O. and N.C.
Auxiliary: 2A, N.O. and N.C.
▪ Tamper Optical back tamper sensor, O.C. active low 32 mA max sink current
▪ Inputs REX: N.O. Dry Contact
Auxiliary (In/Monitor): N.O. Dry Contact, 10 programmable modes
▪ Proximity Card Reader Maximum read range*: 65 mm (2.5 in.)
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM Cards
* Measured using a Rosslare proximity card or equivalent. Range also
depends on electrical environment and proximity to metal.
OPERATIONAL SPECIFICATIONS
▪ Capacity 500 users, single/dual code each
▪ Keypad 3×4 keys for local programming and 4- to 8-digit PIN codes entry
▪ User Levels Normal, Secure, Master
▪ Security Modes Normal, Bypass, Secure
▪ Audio/Visual Interface for BL-D40 (bell, chime, and siren enunciator)
Two tri-color LED indicators, built-in sounder
▪ Design Rugged metal enclosure, highly strong construction, blue backlit
metallic keys. Suitable for extremely harsh environments.
ENVIRONMENTAL SPECIFICATIONS
▪ Operating Environment Water resistant, suitable for outdoor use, IP54 rated
▪ Operating Temperature -20°C to 60°C (-4°F to 140°F), built-in heater to prevent key freezing
▪ Operating Humidity 0 to 95% (non-condensing)
▪ 1
PHYSICAL SPECIFICATIONS
▪ Dimensions 120 x 76 x 27 mm (4.72 x 3 x 1.06 in.)
▪ Weight 440 g (1 lb)