描述
ROSSLARE AC-Q44
Anti-Vandal Piezo PIN & Prox Standalone Controller
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
▪ Operating Voltage Range 12 to 24 VDC, from a regulated power supply
16 to 24 VAC, from a transformer
▪ Input Current Standby: 65 mA, at 12 VDC
Maximum: 125 mA, at 12 VDC
▪ Relay Outputs Lock Strike: 2A, N.O. and N.C.
Auxiliary: 2A, N.O. and N.C.
▪ Tamper Optical back tamper sensor, O.C. active low 32 mA max sink current
▪ Inputs REX: N.O. Dry Contact
Auxiliary (In/Monitor): N.O. Dry Contact, 10 programmable modes
▪ Proximity Card Reader Maximum read range*: 65 mm (2.5 in.)
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM Cards
* Measured using Rosslare Prox Card AT-R14 or equivalent. Range also
depends on electrical environment and proximity to metal.
OPERATIONAL SPECIFICATIONS
▪ Capacity 500 users, single/dual code each
▪ Keypad 3×4 keys for local programming and 4- to 8-digit PIN codes entry
▪ User Levels Normal, Secure, Master
▪ Security Modes Normal, Bypass, Secure
▪ Audio/Visual Interface for BL-D40 (bell, chime, and siren enunciator)
Two tri-color LED indicators, built-in sounder
▪ Design Epoxy potted, fully sealed in a rugged metal slim enclosure, super
strong construction, High-sensitive Piezo metal keys. Highly suitable
for extremely harsh environments
ENVIRONMENTAL SPECIFICATIONS
▪ Operating Environment Water resistant, suitable for outdoor use, IP65 rated
▪ Operating Temperature -20oC to 60oC (-4
oF to 140oF)
▪ Operating Humidity 0 to 95% (non-condensing)
PHYSICAL SPECIFICATIONS
▪ Dimensions 120 x 76 x 22 mm (4.72 x 3 x 0.85 in.)
▪ Weight 521 g (1.18 lbs)
