ROSSLARE MD-D02B

描述

ROSSLARE MD-D02B

2-Reader Expansion Module for AC-225x-B Control Panel

SPECIFICATIONS

ELECTRICAL SPECIFICATIONS
▪ Input Voltage 12 VDC from host controller
▪ Input Current (not including devices)
Standby: 30 mA
Maximum: 135 mA
▪ Number of Reader Ports 2
▪ Number of Inputs 4
▪ Output Relays 4 x 5 A with N.O., N.C. and COM contacts Form-C Relays
▪ Inputs Voltage 5 VDC maximum voltage

INPUT SPECIFICATIONS
▪ Input Type
Selectable: Normally Open, Normally Closed, Supervised with one
resistor (three states, normally open or normally closed), Supervised
with two resistors (four states, Normally Open or Normally Closed)

READER SPECIFICATIONS
▪ Reader Output Voltage 12 VDC
▪ Maximum Reader Current 300 mA
▪ LED Control Output Open collector, active low
▪ Tamper Input 5 VDC maximum voltage
▪ Supported Formats Various, please refer to the AxTraxNG User Guide or the AxTraxPro
User Guide

LED INDICATORS
▪ Power LED Active when connected to a power source
▪ Output LEDs
Four LEDs, each output LED is active when an output relay is activated
and N.O. to COM contacts are shorted

PHYSICAL SPECIFICATIONS
▪ Dimensions (L x W x H) 100 x 75.9 x 32.5 mm (3.9 x 3.0 x 1.3 in.)
▪ Weight: 98.2 g (0.2 lb)

SYSTEM COMPONENTS
The MD-D02B is compatible with a variety of Rosslare’s
single/double/multi-door controllers, any keypad or biometric reader
that supports the Wiegand or Clock-and-Data transmission formats, as
well as with many third-party access control units.