描述
Tenda TEG3328F
L2 Managed Switch
Features
- Map Visualization
- 12M Large Buffer, No Fear of Burst Traffic
- DHCP Snooping: No fear of the illegal, DHCP Servers connected
- Supports Layer 2 And Layer 3 ACL, For More Secure Access
- Multiple Attack Defenses, Multiple Security Blessings
- Various Mounting Options
Specifications
| Hardware | |
| Network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s |
| LED Indicator | One Link/Act LED indicator for each port One Power LED indicator for each device One SYS LED indicator for each device |
| Interfaces | 24*10/100/1000 Base-T Ethernet ports 4*1000 Base-X SFP ports 1*Console port |
| Transmission media | Recommended: CAT5/5e UTP or better |
| Level of protection | Lightning protection for ports: 6kV Lightning protection for power: 6kV ESD: Air discharge: ±10kV Contact discharge: ±8kV |
| Forwarding mode | Store-and-forward |
| Switch capacity | 56Gbps |
| Packet forwarding rate | 41.70Mpps |
| Buffer | 12Mb |
| MAC address table | 16K |
| Jumbo frame | 10K |
| Input voltage | 100-240V AC 50/60Hz |
| Power consumption | Full load: ＜24W Empty load: ＜10W |
| Dimension | 440 mm x 179.6 mm x 44 mm |
| Mounting | Desktop mounting: support Wall mounting: support Rack mounting:non-support |
| Energy Efficient | Support |
| Environment | Operating temperature: 0°C – 45℃ Storage temperature: -40°C – 70°C Operating humidity: (10% – 90%) RH, non-condensing Storage humidity: (5% – 90%) RH, non-condensing |
