描述
ROSSLARE AC-Q42SB
Anti-Vandal Slim Backlit PIN & Prox Standalone Controller
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
▪ Operating Voltage Range 12 to 24VDC, from a regulated power supply
16 to 24VAC, from a transformer
▪ Input Current (Heater Off) Standby: 85mA, Maximum: 145mA, at 12VDC
(Heater On) Standby: 565mA, Maximum: 625mA, at 12VDC
▪ Relay Outputs Lock Strike: 2A, N.O. and N.C.
Auxiliary: 2A, N.O. and N.C.
▪ Tamper Optical back tamper sensor, O.C. active low 32mA max sink current
▪ Inputs REX: N.O. Dry Contact
Auxiliary (In/Monitor): N.O. Dry Contact. 10 Programmable modes
▪ Proximity Card Reader Maximum read range*: 65mm (2.5″)
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM Cards
*Measured using a Rosslare proximity card or equivalent. Range also depends on
electrical environment and proximity to metal
OPERATIONAL SPECIFICATIONS
▪ Capacity 500 Users, single / dual code each
▪ Keypad 3×4 Keys for local programming and 4 to 8 digit PIN codes entry
▪ User Levels Normal / Secure, Master
▪ Audio/Visual Interface for BL-D40 (bell, chime and siren enunciator)
Two tri-color LED indicators, Built-in sounder
▪ Security Modes Normal, Bypass and Secure
▪ Design Epoxy potted, fully sealed in a rugged metal slim enclosure, highly strong
construction, blue backlit metallic keys. Suitable for extremely harsh
environments.
ENVIRONMENTAL SPECIFICATIONS
▪ Operating Environment Water resistant, suitable for outdoor use, meets IP65
▪ Operating Temperature -20ºC to 60ºC (-4ºF to 140ºF). Built-in heater to prevent key freezing
▪ Operating Humidity 0 to 95% (non-condensing)
PHYSICAL SPECIFICATIONS
▪ Dimensions (H x W x D) 120 x 76 x 22 mm (4.72 x 3 x 0.85 in)
▪ Weight 521g (1.18 lbs)
