描述
POWERCOM-ONLII-33
ONL-II Three Phase 3 Phase UPS
POWERCOM-ONLII-33 屬POWERCOM不斷電系統（UPS）產品。傑成系統有限公司（香港防盜）為POWERCOM產品安裝商及經銷商，可提供供應、安裝、調試、保養及維修。UPS 可為閉路電視錄影機、門禁控制器、網絡設備及伺服器提供後備電源，方案可參考Server Room 架設及維修。規格以原廠資料為準。
產品說明
POWERCOM ONLII-33 three phase UPS with high performance UPS are the best choice for data center, telecom system and industrial application. POWERCOM ONLII-33 three phase UPS with colorful touch screen are available to clearly shows up UPS status. ONLII-33 three phase UPS with dry contact function for signal control. ECO energy – power saving ONLII-33 are intellectual heat radiation control, it reduce noise and extending service life. ONLII-33 with upgraded VIS system and built-in maintains administrator is easier for management and maintenance. High performance POWERCOM three phase ONLII-33 UPS with dry contact function, eco energy saving design, audible alarm system are suitable for telecom, datacenter and industrial usage.
- Three phase UPS with industrial grade design
- IGBT modular design and dry contact function
- Digital signal processor control (DSP)
- Intellectual heat-radiating mode
- Isolate transformer equip
- Human-Voice alarm reminding
- ONLII33 – 10K ~ 250K
型號：ONLII-10K33、ONLII-15K33、ONLII-20K33、ONLII-30K33、ONLII-45K33、ONLII-60K33
規格
| UPS | |||||||
|---|---|---|---|---|---|---|---|
| Model | ONLII-10K33 | ONLII-15K33 | ONLII-20K33 | ONLII-30K33 | ONLII-45K33 | ONLII-60K33 | |
| Capacity(VA) | 10K VA | 15K VA | 20K VA | 30K VA | 45K VA | 60K VA | |
| Capacity(Watts) | 8K KW | 12K KW | 16K KW | 24K KW | 36K KW | 48K KW | INPUT |
| Grid System | 3 Phase + Neutral + Ground | ||||||
| Voltage | 190 / 200 / 208 / 220 / 380 / 400 / 415 / 440 Vac (Line-Line) | ||||||
| Voltage Range | 152 – 528 Vac (Line-Line) | ||||||
| Frequency | 50 / 60 Hz (Auto Sensing) | ||||||
| Frequency Range | 45 – 65 Hz | OUTPUT | |||||
| Inverter Voltage | 190 / 200 / 208 / 220 / 380 / 400 / 415 / 440 Vac (Line-Line) | ||||||
| Inverter Frequency | 50 / 60 Hz | ||||||
| Output Power Factor | 0.8 – 1.0 Lagging | ||||||
| Voltage Precision | ± 1% (100% Linear Load) | ||||||
| Transient Response | Linear Load 0 – 100% < 5% | ||||||
| Transient Rescovery | ±2% < 50ms | ||||||
| Output THDv | < 3% (Linear Load) | ||||||
| Inverter Overload | > 100%, 30 min > 125%, 10 min > 150%, 1 min |
||||||
| Frequency Regulation | 50/60 Hz ± 0.1% | ||||||
| Synchronized Range | Default Range : ±5Hz | ||||||
| Synchronized Slew Rate | Default Range : 1Hz/s | Battery and Charger | |||||
| Battery Voltage | 10-80K(120/208VAC) : 192VDC, 12V-16 pcs as one set 10-120K(220/380VAC) : 360VDC, 12V-30 pcs as one set |
||||||
| Charger Voltage Precision | 1% | ||||||
| Charger Power | Battery 16 pcs-220VDC, Battery 30 pcs-410VDC, Battery 32 pcs-435 VDC Current : Depending on the model used 1.5, 2.5, 3, 5, 10, 15, 20, 30, 40, 50A Options and Automatic Current Limiting Function can be set |
Bypass Input | |||||
| Voltage | 190 / 200 / 208 / 220 / 380 / 400 / 415 / 440 VAC (Line-Line) | ||||||
| Voltage Range | 152 – 528 VAC(Line-Line) | ||||||
| Frequency | 50 / 60 Hz | ||||||
| Frequency Range | 45 – 65 Hz | ||||||
| Bypass Overload | > 100%, 30 min > 125%, 10 min > 150%, 1 min |
Efficiency | |||||
| Normal Operation | > 85% | > 86% | > 88% | ||||
| Battery Operation | > 87% | > 88% | > 90% | Static Transfer Switch | |||
| Inverter to Bypass | 0 ms | ||||||
| Bypass to Inverter | 0 ms | ||||||
| Transfer Efficiency | > 99% | Environment | |||||
| Operation Temperature | 0 – 40°C | ||||||
| Storage Temperature | -15°C ~ 60°C | ||||||
| Relative Humidity | 0 – 95% non-condensing | ||||||
| Noise | Less than 60dBA | ||||||
| Altitude | Normal Load : < 1000m Load derated 1% per 100m from 1000 to 2000m |
Physical Data | |||||
| Dimension (WxDxH)(mm) |
530 x 859 x 1010 | 810 x 810 x 1900 | |||||
| Weight (kg) | 310 | 340 | 368 | 398 | 515 | 567 | Alarm |
| Event Log | Detail ups status description not use error code, record item number of event max 2400 | ||||||
| Network | Network connection port (10/100 Base. T) and remote monitor control, not use SNMP card | ||||||
| Dry Contact | Max item : 20 status, programmable select : 4 item | System | |||||
| Display | 7″ TFT LCD touch screen indicator | ||||||
| Interface | Standard : RS232 / RS485 / Dry Contact Optional : SNMP |
||||||
| Other Function | Standard : Battery Cold Start Optional : Parallel Kit |
||||||
