描述
| Model | MXC6050VR |
| ..[Camera] | |
| Image Sensor | 1/2.9” Progressive CMOS Sensor |
| Scaning System | 16:9 Progressive |
| Sync. System | Internal |
| Effective Pixels Number | 1920(H) x 1080(V) 2.0 Mega |
| Horizontal Resolution | 1100 TV Lines |
| Video Output Level | Select NTSC/PAL 1.0Vp-p (BNC 75Ω, composite) |
| Lens | Built-in DC Iris Vari-focal Mega Pixel Lens (f=3.5~16mm) |
| Day & Night System | ICR (Cds Type) |
| IR LED and Sensor | 36EA (850nm, 45˚) & Sensor 1EA |
| Min. Illumination | 0.12Lux (Color), 0.00 Lux (IR LED On) |
| White Balance | Auto |
| ..[Video] | |
| Compression | H.264 / MJPEG |
| Resolution | Full HD, 720P, 4CIF, VGA, CIF, Crop |
| Multi-Profile Streaming | * 5 Simultaneous video profiles * Select the codec type, resolution and frame rates for each profile |
| Intelligent Bit-rate Control | Hybrid Bit rate control (VBR+CBR) |
| Image setting | Text overlay, Privacy mask, De-interlace filter |
| Motion detection | 3 regions |
| ..[Audio] | |
| Mono Upstream | 32Kbps G.726 ADPCM (Line-in / Mic-in) |
| Mono Downstream | 128Kbps 16bit Linear PCM, Line-out(1.0Vp-p) |
| ..[Network] | |
| Protocol | IPv4/v6, TCP, UDP, IGMP, ICMP, ICMPv6, ARP, RARP, PPPoE, RTCP, RTP, RTSP, SDP, HTTP, HTTPS, SMTP, FTP, DHCP, UPnPP, NTP, DNS, DynDNS, Socks |
| Supported DDNS | Supported (CNB DDNS) |
| Security | – User ID & Password protection, IP address filtering, – HTTPS encryption, Digest Authentication, User Access Log |
| LAN | 10/100 Base-T LAN (auto MDIX) |
| Analog Output | 1 Channel D1 CVBS Output of the encoding video |
| Alarm | Alarm I/O (1 Sensor input & 1 Relay output) |
| Other | Mic, Line in / Line Out / 12VDC |
| ..[ALARM / EVENT] | |
| Intelligent Video | Motion Detection |
| Alarm Triggers | Sensor Input |
| Alarm Events | Video file upload(FTP), Still image(Email), PTZ preset, Relay output |
| Video Buffer | Pre & Post alarm |
| ..[Applications] | |
| Browser | Internet Explorer 8 or Higher |
| Monitoring Application | XNET NVR 2, and Utility (IP-Installer) |
| ..[Maintenance] | |
| System Upgrade | Firmware upgrade over HTTP |
| ..[Mechanical] | |
| Standard PoE | Standard IEEE 802.3af supported |
| Power | DC 12V Max. 1A |
| Dimensions | 100(W) x 125(H) x 267.75(D)mm |
| Operating Temp. / Humidity | -10℃ ~ 50℃ |
| Weight | Approx. 1.2Kg |
